GEAR DRIVE CAM KITS FOR TWIN CAM 2007/LATER & 2006 DYNA MODELS

Weight: 3.03

• Reduced maintenance (no plastic chain guides or tension shoes to wear and contaminate engine oil or clog oil passages)
• Cam timing remains constant; all drive and cam gears utilize a light press fit (gear lash) thus eliminating any chain stretch
• Bearing loads are reduced; no chain tensioners are used which can rob horsepower
• Critical sprocket alignment is unnecessary
• To ease installation and eliminate the need to remove the fuel tank and rocker covers, use our adjustable pushrods found in the engine section
• Includes instructions

55HG Cam Kit
Timing(*): 22/46 & 52/20
Duration @ .053: 248 & 252
Duration @ .020: 283 & 292
Valve Lift: .550 & .550
Lift @ TDC: .197 & .181
Stock Springs

Application: Great cam for 95 to 103 engines with 9.8 to 10.2 compression ratio. Max horsepower to torque at mid and upper RPM's (2600-6200 RPM)

ANDREWS PRODUCTS INC®

Not legal for sale or use in California, or on any pollution controlled vehicles.