GENERAL MERCHANDISE SECTION RED PART NUMBERS INDICATE NEW PARTS 10-59 1 2 3 4 5 6 7 8 9 10 11 CONTENTS ELECTRICAL FRAME FRONT END CONTROL WHEEL ENGINE DRIVE TRAIN FUEL EXHAUST GENERAL REFERENCE ADJUSTABLE TORQUE WRENCH ADAPTER Description Use on Shovelhead and EVO, Big Twin 1966/Later, 60774 Single cam only. Includes aftermarket and S&S motors. Bore size 3.4375”- 4” Twin Cam Big Bore Cylinders, Big Bore Cylinders with 60825 OEM bolt pattern 1999/Later Bore size 4”- 4.060” Twin Cam 88, 96 with OEM bolt pattern, 1999/Later 60826 Bore size 3.75”- 3.875” VALVE SPRING COMPRESSOR FOR ALL MODELS Made for the longer valve and spring combination of the Evolution, but will still work on all early Big Twin and Ironhead Sportster models. Works on all Big Twin and Sportster heads, all years. Black wrinkle powder coated. (Rpls. HD 96600-36B) Part 60754 PISTON PIN LOCK RING TOOLS FOR MOST MODELS 110” PISTON PIN CLIP REMOVER & INSTALLER PISTON PIN CLIP TOOL FOR MILWAUKEE-EIGHT® MODELS Used to install spiral lock rings like 65102. Used on OEM or aftermarket pistons with a .515’’ I.D. wrist pin, this tool installs the lock ring in one easy step without distorting the ring, and allowing the safest wrist pin retention possible. Used on all models with spiral lock piston pin lock rings. Lock ring not included. (Rpls. HD 96780-58A) Used to install round wire piston pin lock rings like 65196 on Shovelhead 1983/Later, Big Twin Evolution and all Sportster Late 1985/Later. Lock ring not included. (Rpls. HD 34623A) Part 60744 Part 60865 Part 60899 Part 60817 For Round Wire Lock Ring For Spiral Lock Ring Incorrect piston pin clip removal can damage the piston, and incorrect installation can damage the clip. Damaged clips can come out during engine operation, causing catastrophic failure. This tool is designed exclusively for the Screamin’ EagleTM 110” engine to ensure proper pin clip removal and installation. Late model aluminum cylinders cannot be accurately honed without using torque plates. These plates simulate operating stress conditions, when boring or honing aluminum cylinders. They easily adapt to conventional boring bars or a Sunnen type honing machine. These plates are drilled precisely for multiple application use, and can accommodate various bore sizes with stock or oversize big bores. Kits are laser lettered for ease of use with torquing sequence, and most sets don’t require removal of ring dowels. Refer to chart for sizes and applications available. Part 07517 Shown In Use Wrench Not Included • Torque any fastener with a combination wrench or Allen wrench. • Will work with 6mm (1/4”) through 19mm (3/4”) combination wrenches. • Will work with 6mm and 8mm Allen wrenches. • Heat-treated steel with a black oxide finish. • 3/8” square drive is rated for a maximum torque of 90 ft-lbs. • Removes and installs piston pin clip. • Sold each. Engine Tools ENGINE CYLINDER TORQUE PLATE KIT FOR BIG TWIN Fits Milwaukee-Eight® Touring Models 2017/Later & Softail 2018/Later
RkJQdWJsaXNoZXIy MzYzNTI=