ENGINE SECTION RED PART NUMBERS INDICATE NEW PARTS 6-86 1 2 3 4 5 6 7 8 9 10 11 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Cam Side Parts CAM GEAR THRUST WASHERS FOR BIG TWIN Thickness Part # .045” (Rpls. HD 25555-84) 66217C .050” (Rpls. HD 25550-36) 66219C .055” (Rpls. HD 25551-36) 66220C .060” (Rpls. HD 25552-36) 66221C .065” (Rpls. HD 25553-36) 66222C .070” (Rpls. HD 25554-36) 66223C .075” (Rpls. HD 25555-36) 66224C .080” (Rpls. HD 25556-79) 66225C Part 66230 • Set your cam shaft end play right to factory specifications with these hardened Thrust Washers. Note: Also fits Big Twin Evolution 1991/Later when using aftermarket cam. Thrust Washer Assortment Pack, .050” through .095” thick (10 pieces) Fits OHV Big Twin 1936/1990 INDIVIDUAL WASHERS Description Rpls. HD Part # Shim .110” 25316-52 66084C Shim .115” 25313-50 66081C Shim .120” 25314-50 66082C Shim .125” 25315-50 66083C Model & Year Rpls. HD Part # Twin Cam 1999/2006 9198 64633 (except Dyna 2006) Twin Cam 2007/Later & 9215 & 66923 Dyna 2006 9298A BREATHER VALVE/GEAR SHIMS FOR BIG TWIN • A breather valve/gear with too much end play will knock. • Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. • Shims are available for 1950/Early 1979 that have a .195” I.D. and Late 1979/1982 that have a .334” I.D. • These steel shims are designed to be used with steel breather valve/gears only. Description Rpls. HD Part # Shim .110” 25320-79 66085C Shim .115” 25321-79 66086C Shim .120” 25322-79 66087C Shim .125” 25323-79 66088C Shim .130” 25325-79 66089C Late 1979/1982 1950/Early 1979 INNER CAM BEARING FOR TWIN CAM Standard procedure and professionalism dictates that during any cam change or overhaul, both cam bearings must be replaced. Use our removal tool 60828 (shown in use) and our installation tool 60830 found on Page 10-70 , for a quick and easy job. Sold each. CAM DRIVE SPROCKET SPACER SET 2006/Later Set of 6. Includes 1 each of the following: Thickness Rpls. HD .100” 25729-06 .110” 25731-06 .120” 25734-06 .130” 25736-06 .140” 25737-06 .150” 25738-06 Part 66057
RkJQdWJsaXNoZXIy MzYzNTI=