ENGINE SECTION RED PART NUMBERS INDICATE NEW PARTS 6-36 1 2 3 4 5 6 7 8 9 10 11 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Valve Guides & Seals • The best Valve Guide Seals available! • Made from a very elastic fluoro-viton polymer, with 5% Teflon® added to help prevent excessive valve to seal friction. • A metal garter spring retains a constant valve seal to valve tension for precise oil control. • Feature a bonded steel jacket, providing a secure fit to the valve guide. • Internal ribs are designed to easily slip the seal on the valve guide without the use of a valve seal installation tool, but hold snug after installed. • Sold in pack of 4. VALVE GUIDE SEALS FOR BIG TWIN & SPORTSTER Valve O.D. & Model & Year Guide O.D. Part # Shovelhead Late 1981/Later. 3/8” 61413 Intake & Exhaust. (Rpls. HD 18000-81) .625” Big Twin Evolution 1984/1999, Twin Cam 1999/2004 & Sportster 1986/2003. 5/16” 61415 Intake & Exhaust. (Rpls. HD 18001-83A) .420” Ironhead Sportster 1957/1985. 5/16” 61414 Intake (machining required) .530” Size Part # Model & Year O.D Rpls. HD # Intake Exhaust Big Twin Evolution STD 18112-92B 61784 61792 1984/Later, Twin Cam +.001” 18130-83D 61785 61793 1999/2004 & Evolution +.002” 18133-83B 61800 61805 Sportster 1986/2003 +.003” 18131-83D 61801 61806 +.004” –– 61802 61807 CAST IRON VALVE GUIDES FOR EVOLUTION & TWIN CAM • Engineered with the professional rebuilder in mind. • Cast iron is known for its high mileage capabilities, due to its natural lubricity. • Each guide has a spiral style snap ring shoulder to ensure proper location, and has been shortened to accept up to .600” lift cams. • All guides have hand honed I.D.s to ensure fit and quality. • Standard O.D. is .562”. All guides have .420” O.D. seal area. • Sold each. Clearanced For .600” Lift VALVE GUIDE SEALS FOR MILWAUKEE-EIGHT® 107” & 114” BIG TWIN 7MM VALVE GUIDE SEALS FOR BIG TWIN & SPORTSTER VALVE GUIDE SEALS FOR TWIN CAM & MILWAUKEE-EIGHT® • Viton valve stem seals with steel lower valve spring collars built in. • A wire clip gives a constant valve seal to valve tension for precise oil control. • Sold in packs of 4. • Fits Milwaukee-Eight® 107’ & 114” 2017/Later. • 6mm. • Sold in packs of 8. Guide Valve Stem Model & Year O.D. O.D. Part # Twin Cam Models 2005/Later .562” .275” 61416 Sportster 2004/2006 (Rpls HD 18094-02A) Guide Valve Stem Model & Year O.D. O.D. Part # Twin Cam Models 2004/Later .562” 7mm 61421 Metal Body Tophat Design (Sold in Pack of 4) Milwaukee-Eight® 2017/Later .530” 11/32” 61422 Supreme Tophat Design (Sold in Pack of 8) KPMI® Red 100% Viton valve stem seals are designed to have optimum fitment, allow maximum lift, and to give maximum life. KPMI® Red valve stem seals are resistant to high temperatures, petroleum products and the corrosive gasses that are the by-products of combustion. These seals retain their ability to seal in situations where other materials could harden and allow oil to enter the combudtion chamber, causing detonation, carbon build up and a loss of power. The Red Ones are truly the racer’s choice. Part 61420 7mm 6mm 61422
RkJQdWJsaXNoZXIy MzYzNTI=