CONTROL SECTION RED PART NUMBERS INDICATE NEW PARTS 4-106 1 2 3 4 5 6 7 8 9 10 11 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Pro SwivelTM & OE Fit Brake Lines OE FIT CLEAR COAT BRAIDED STAINLESS STEEL BRAKE HOSE FOR ALL MODELS PRO SWIVELTM BRAKE HOSE ASSEMBLIES FOR ALL MODELS Continued on Next Page Upgrade your existing brake lines with these pressure tested Clear Coat Braided Stainless Steel Brake Lines. Unlike the OE rubber brake lines that expand under pressure and give you a spongy brake feel, these braided stainless steel covered brake lines retain flexibility while eliminating pressure expansion and providing a positive brake feel. To enhance their good looks and protect the braided portion of the brake line from rubbing against any other parts, a Clear Coat has been applied. This Clear Coat is UV resistant to help prevent yellowing or hardening from weather. All ends, junctions and brake tees are chrome plated for years of corrosion resistant good looks. All measurements are given in total length, end to end. To aid in brake line identification, the brake line ends and junctions are identified below. A Straight 3/8 - 24 Inverted Flair End B 30˚ Bend 3/8 - 24 Inverted Flair End D 90˚ Bend-Short 3/8 - 24 Inverted Flair End E 90˚ Bend-Long 3/8 - 24 Inverted Flair End C 12mm Straight Banjo Ends F 10mm Straight Banjo Ends G Double Bend Top Line to Brake Tee 3/8 - 24 Inverted Flair End J 10mm 45˚ Bend Banjo Ends H 10mm 70˚ Bend Banjo Ends K 10mm 45˚ Bend Threaded Fitting Banjo Ends N 10mm 90˚ Bend Banjo Ends O Without Mounting Tab Junction (For Brake Sending Unit) M 10mm 30˚ Bend Banjo Ends Q With Mounting Tab Junction (For Brake Sending Unit) P 45˚ Bend 3/8 - 24 Inverted Flair End Russell Pro SwivelTM Brake Hoses feature our exclusive 360O swivel banjo system. (Patent Pending). The Pro swivelTM banjo is incorporated at the caliper end of the hose assembly making rotation alignment hassle free. Uses stock hardware and mounting locations. Straight 7/16” ID Banjo X 90O Length Part # 40” 49730 42” 49732 44” 49733 46” 49735 48” 49737 35O 7/16” ID Banjo X 90O Length Part # 40” 49731 44” 49734 46” 49736 90O 7/16” ID Banjo X 90O Length Part # 48” 49738 50” 49739 52” 49740 54” 49741 90O 3/8” ID Banjo X 90O Length Part # 48” 49742 50” 49743 52” 49744 54” 49745
RkJQdWJsaXNoZXIy MzYzNTI=