CONTROL SECTION RED PART NUMBERS INDICATE NEW PARTS 4-99 1 2 3 4 5 6 7 8 9 10 11 CONTENTS ELECTRICAL FRAME FRONT END CONTROL WHEEL ENGINE DRIVE TRAIN FUEL EXHAUST GENERAL REFERENCE 3/16” O.D. Universal Brake Lines * NOT designed for Sportster models 2004/Later. “CUT TO LENGTH” HOSE & FITTINGS FOR BRAKE AND HYDRAULIC CLUTCH • Russell’s Pro System II Hose and Fittings are designed for custom builders that need to easily fabricate brake or hydraulic clutch lines. • The “cut to length” semi-rigid black nylon hose has a 3/16” O.D. for a low impact custom look yet provides improved braking effect with the same lever pressure as OE size hose. Note: Hose is not DOT approved, but is rated to 1200 PSI. • The chrome plated steel compression fittings (sold separately) are available to replace 3/8-24 & 7/16-24 banjo bolts as listed. The 1/8-27 NPT compression fittings are designed for early style or custom brake hoses drilled and tapped for pipe thread. • The 45780 male adapter end is designed for use with -3 male adapter banjo ends or brake tees found on 4-102 when required. Straight Fitting 45778 45776 45777 Straight Banjo 45530 45533 49510 3/16” O.D. Brake Hose Description Part # 25’ Roll of Black Nylon Hose 49510 3/8-24 Straight Fitting, replaces 3/8” Banjo 45776* 7/16-24 Straight Fitting, replaces 7/16” Banjo 45777* 1/8-27 NPT Straight Fitting 45778 1/8-27 NPT 90˚ Fitting 45779 -3 Male Adapter for Banjo Ends or Brake Tees 45780 Replacement Compression Ferrules, Pack of 10 45781 Straight Banjo for 3/8” or 10mm Banjo bolt 45530 Straight Banjo for 7/16” Banjo bolt 45533* 35˚ Banjo for 3/8” or 10mm Banjo bolt 45537 35˚ Banjo for 7/16” Banjo bolt 45546* 90˚ Fitting 45779 35˚ Banjo 45537 45546 -3 Male Adapter 45780 Compression Ferrule 45781 10 pack
RkJQdWJsaXNoZXIy MzYzNTI=