CONTROL SECTION RED PART NUMBERS INDICATE NEW PARTS 4-40 1 2 3 4 5 6 7 8 9 10 11 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Cable Reference Guide CABLE REFERENCE GUIDE Housing Length Free Length Housing Length Housing Length Free Length Harley-Davidson® throttle cables for the 1996 and later models require a press-in fitting on the cables unlike the pre-1996 models which have the screw-in cable ends (see below). Although the measurement specifications for both types of cables are identical. Please make sure to order the correct cable for your specific year and model. HOW TO MEASURE CABLES ELBOW ANGLE TYPES 45O Elbow 70O Elbow 90O Elbow ELBOW FITTINGS The correct cable measurement is determined by the length of housing and the type of elbow or fitting located at the end of the cable. To determine the exact length of the cable, use the diagram above to confirm the correct location for measurement with each specific type of elbow or fitting. Do not combine the free length and housing length to determine overall cable length; these are separate and unique measurements. A B C D A. Pre 1996 Throttle 5/16-18 Threads per inch. B. Pre 1996 Idle 1/4-20 Threads per inch. C. 1996 and later throttle. D. 1996 and later idle.
RkJQdWJsaXNoZXIy MzYzNTI=