Mid-USA 2024 Catalog

INDEX 1 2 3 4 5 6 7 8 9 10 11 ELECTRICAL SECTION RED PART NUMBERS INDICATE NEW PARTS 1-40 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Taillights & Lenses These Tombstone Taillight Kits include a mount kit that will simplify installation on the FL style rear fender. They are available in your choice of the bulb type or the updated LED (light emitting diode) type. The bulb type uses a single automotive type #1157. The LED type uses 45 separate red LEDs for the brake/taillight function and 3 blue LEDs to illuminate the license plate. The taillight assembly is die cast for strength and the fender adapter mount is stamped steel. A mount to fender gasket is included. It may be necessary to relocate the original turn signal mounting bar on some models. 12 volt. Fits FL style rear fenders 1973/1998. TOMBSTONE TAILLIGHTS WITH MOUNT FOR FL STYLE REAR FENDER 1973/1998 Description Part # Bulb type Taillight with Mount Kit 19909 LED type Taillight with Mount Kit 19923 Bulb type Tombstone Taillight Assembly only 11209 LED type Tombstone Taillight Assembly only 11226 Mount Kit only, includes fender gasket. 13109 Fits This type of Taillight Mount Note: These taillights are not DOT approved and should be used accordingly. TOMBSTONE TAILLIGHT ASSEMBLIES FOR 1947/1954 MODELS Description Part # Bulb type Taillight Assembly 11209 LED type Taillight Assembly 11226 Taillight Lens only 11721 (Rpls. HD 68090-47T) Bulb Type LED Type Available in your choice of the bulb type or the LED (light emitting diode) type. The bulb type uses a standard automotive #1157 or our 11801 incandescent dual contact bulb. The LED type uses 45 red LEDs for the brake/taillight and three blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredible life span. The LEDs do not produce any power robbing heat and draw only 4.5 watts of power, as opposed to the 29.4 watts of power that the incandescent bulb draws. These 12 volt taillights feature a die cast housing and include a rubber fender gasket. License mount and hardware is also included. Fits Big Twin models 1947/1954 and custom applications. (Rpls. HD 68003-47T) Note: These taillight assemblies are not DOT approved and should be used accordingly. Note: These taillight assemblies are not DOT approved and should be used accordingly. BEEHIVE TAILLIGHT ASSEMBLY FOR 1939/1946 MODELS • Many universal mounting applications. • Includes 12 volt bulb, rubber gasket and chrome plated license bracket. Fits 1939/1946 models & custom applications. (Rpls. HD 68002-39T) Note: This Taillight is not DOT approved and should be used accordingly. Description Part # Red Taillight lens (plastic) 11741 (Rpls. HD 68090-39T) REPLACEMENT PART Part 11208 TOMBSTONE TAILLIGHT ASSEMBLIES FOR 1947/1954 MODELS • A new version of an old standard. • The lens now covers more area and wraps around the base for a more visual taillight. • Available in bulb type (which uses a standard #1157 incandescent bulb found on Page 1-34/35 ), or LED type. • Made from cast aluminum. • Includes rubber fender gasket, license mount, and hardware. • 12 volt. • Use with mount kit 13109 to adapt to 1973/1998 style rear fender. Fits Big Twin 1947/1954 & custom applications. (Rpls. HD 68003-47T) Included parts Part 11249 Bulb Type

RkJQdWJsaXNoZXIy MzYzNTI=