Mid-USA Motorcycle Parts 2022 Volume 38 En-Cycle-Pedia Catalog

INDEX 1 2 3 4 5 6 7 8 9 10 11 ELECTRICAL SECTION RED PART NUMBERS INDICATE NEW PARTS 1-104 CONTENTS REFERENCE GENERAL EXHAUST FUEL DRIVE TRAIN ENGINE WHEEL CONTROL FRONT END FRAME ELECTRICAL Ignition Modules 8 Pin Connector Description Type Dual spark plug per head kit 19915 IGNITION MODULES AND KIT FOR BIG TWIN AND SPORTSTER 7 Pin 8 Pin Description Type Type Single Fire or Dual Fire type Ignition Module –– 17505 Dual Fire type Ignition Module 16043 17506 • Eliminate your non-adjustable original equipment ignition with your choice of our DYNA 2000 Adjustable Ignition Module only, or our DYNA 2000 Adjustable Ignition Module with Twin Fire Coil Kit. • Available for single and dual fire systems, single or dual plug applications, the module offers a selection of four different advance curves and programmable 6000 RPM to 7500 RPM rev limiter. • Best advance curves available for stock to highly modified engines. • Designed to replace the stock ignition while still retaining the OEM dual fire type ignition pickup and the rotor (cup) that is located in the gear cover. • Instructions Included. • Available for a 7 pin or an 8 pin type plug-in connector. • The 7 pin type fits all Big Twin and Sportster models 1984/1994 (except 1994 FLT and 1994 Sportster). NOTE: Use 16130 extension for all 1984/1990 models. • The 8 pin type fits FLT models 1994/1998 (except with EFI), Softail 1995/1999, Dyna 1995/1998 & Sportster 1994/1997. Modules only (use with 2.8 through 3.5 OHM coil) Extension Harness Single Fire Module & Coil Kit Part 16130 (for 7 pin module) Required for all Big Twin and Sportster models 1984/1990. Converts 3 pin connector to 7 pin type module connector. ADJUSTABLE IGNITION MODULES FOR CARBURETED TWIN CAM & SPORTSTER • Provides a wide timing advance adjustment range for stock to highly modified engines. • Adjustable RPM limit in 100 RPM increments up to 9,900 RPM. • Built-in data logging stores the last 30 minutes of engine operation including RPM, vehicle speed, manifold pressure, ignition advance & battery voltage. This information is useful for tuning & diagnosing problems. (Requires optional PC link interface cable & software). • The optional PC link interface cable & Windows compatible software allows for the use of a laptop PC to program a custom advance curve for precise dyno tuning & recalibrate the speedometer & odometer to accommodate non-stock tire sizes or gearing changes. • Visit www.daytona-twintec.com for the latest free software updates, Frequently Asked Questions (FAQ’s) and product information. • Ignition modules provide full support for the J1850 data bus used for communications with the instrument cluster & turn signal/security module. It is also compatible with the HD® scan tool to read sensor data & clear diagnostic codes. • 17637 can be set for single spark per ignition cycle like stock or set for multiple sparks per cycle. • Includes instructions. Model & Year Part # Twin Cam 1999/2003 (carbureted) 17637 Twin Cam 2004/2006 (carbureted) & Sportster 2004/2006 17500 Description Part # PC USB Link interface cable & software 82732 17637 17500 Ignition Modules Optional Part Not legal for sale or use in California, or on any pollution controlled vehicles. Not legal for sale or use in California, or on any pollution controlled vehicles.

RkJQdWJsaXNoZXIy MzYzNTI=