CAMS FOR BIG TWIN EVOLUTION ALL YEARS

CAMS FOR BIG TWIN EVOLUTION ALL YEARS
Manufacturer: ANDREWS PRODUCTS INC
Availability: In stock
Part #: 66831

Weight: 2.06

  • Time tested and track proven Andrew's cams have computer enhanced design features that provide a superior combination of performance gains and reliability without sacrificing component longevity
  • Installation instructions included
  • Timing and Duration measured at .053" cam lift
  • Listed for Reference: 1984/1987/Later OE cam is 212° intake, 202° exhaust, .472" lift on both valves. Timing 03/39, 54/02. Valve Lift .495", .495". Duration 222, 236. Grind OEM (L) 1988/1991
  • Listed for Reference: 1992/Later OE cam very close to 1984/1987 specs. California cams are approximately 178° duration. Fuel injected "0" cam is 200° duration intake and 216° duration exhaust. Timing 02/30, 31/09. Valve Lift .472", .472". Duration 208, 202. Grind OEM (N) 1992/Later
    Bolt-in mild street cam that produces more torque and horsepower for all around riding when used in 80 cubic inch engines with the standard 8.5 to 1 compression ratio. This cam pulls strong between 1800/5200 RPM. USE STOCK SPRINGS. EFI or Carb. Timing 10/20 40/08. Valve Lift .498". Duration 220 228. Grind EV23.
    By: ANDREWS PRODUCTS INC

Not legal for sale or use in California, or on any pollution controlled vehicles.

Customers who bought this item also bought

EXHAUST PORT GASKET

94022
EXHAUST PORT GASKET

MID-USA OIL FILTERS FOR BIG TWIN & SPORTSTER

87172
MID-USA OIL FILTERS FOR BIG TWIN & SPORTSTER

HARDWARE WHEEL BEARING SHIMS & SPACER WASHER

56436
HARDWARE WHEEL BEARING SHIMS & SPACER WASHER

PERFORMANCE TAPPET ASSEMBLIES FOR MOST MODELS

61975
PERFORMANCE TAPPET ASSEMBLIES FOR MOST MODELS